There is no single "best" noise barrier — there is the right barrier for your noise source, your site and your budget. The four constructions below cover the vast majority of projects we export. Pick wrong and the wall either costs more than it needed to, or quietly underperforms until the complaints start.
1. Reflective metal barrier
A single solid leaf — perforated-free, no acoustic core. It blocks sound the way a wall blocks light: the receiver behind it gets quiet, but the energy reflects back toward the source.
- Best for: railway cuttings, industrial plant boundaries, any site where the opposite side has no sensitive receptors.
- Watch out: on a highway flanked by housing on both sides, a reflective wall helps one side at the other side\'s expense.
- Cost band: the bottom of the range — roughly USD 25–45/m² FOB.
2. Absorptive composite barrier
The workhorse of highway and urban projects. A perforated front face over an 80 mm centrifugal glass wool core (NRC ≥ 0.85), backed by a solid rear leaf. Sound that hits the panel largely stays in the panel instead of bouncing across the road.
- Best for: highways and urban arterials facing communities; the default choice when both sides of the corridor are sensitive.
- Watch out: absorptive panels must drain — the core needs a drainage path or it saturates and loses performance. Check the bottom-rail detail on any drawing.
- Cost band: roughly USD 35–70/m² FOB.
3. Transparent barrier (polycarbonate)
Solid polycarbonate glazing in a metal frame. It blocks sound like the reflective panel but keeps sightlines open — which is why interchanges, medians and scenic stretches specify it. It also reads lighter to drivers and residents than a 4-metre steel wall.
- Best for: visibility-critical stretches and mixed sections where the community pushed back on a solid wall.
- Watch out: PC panels are the upper half of the cost band (USD 45–95/m²) and they do nothing to absorb — pair them with absorptive sections where receivers are close.
- See the product: PC transparent panel.
4. Acoustic louvre
A louvered panel that lets air flow through while attenuating sound. Where a solid wall would block the ventilation a plant needs, the louvre is the answer — around cooling towers, chiller yards and generator houses.
- Best for: equipment enclosures and plant screens where airflow cannot be interrupted.
- Watch out: a louvre trades attenuation for airflow; it never matches a solid panel\'s insulation. Size it against the equipment\'s required airflow, not just the noise target.
- See the product: ventilation silencer and louvre range.
Quick selection table
| Reflective | Absorptive | Transparent | Louvre | |
|---|---|---|---|---|
| Blocks sound | Yes | Yes | Yes | Partially |
| Absorbs | No | Yes (NRC ≥ 0.85) | No | Moderate |
| Airflow | No | No | No | Yes |
| Sightlines | No | No | Yes | Partial |
| Indicative FOB | 25–45 | 35–70 | 45–95 | By project |
Two mistakes we see at quotation stage
Specifying absorptive everywhere "to be safe." Absorption pays for itself only where reflections matter. In a cutting with rock walls on one side, the extra core is dead weight on your freight bill.
Treating the barrier as a wall, not a system. Posts, foundations, bottom rails and drainage decide whether the panels perform for their design life. Every quotation we issue prices the complete system — post-and-panel construction documented in English shop drawings — and installation is executed by your own contractor against those drawings.
Tell us the noise source and the site — we will recommend one construction and price it within 24 hours, rather than quoting you all four.
Frequently asked questions
Which is better: reflective or absorptive noise barrier?
Reflective panels block sound and bounce it back; absorptive panels block it and soak it up. Beside a highway facing homes, absorptive is worth the premium because reflected sound degrades the acoustic benefit on the opposite side. In cuttings or industrial yards where the opposite side has no sensitive receptors, reflective is the economical choice.
Can you mix transparent and metal panels in one barrier?
Yes, and it is common practice. Many highway projects run transparent PC glazing through sightline-critical stretches — interchanges and medians — and absorptive metal panels everywhere else, mounted on the same post system. Both sections are manufactured to one post spacing so they assemble as a single wall.
What NRC should an absorptive barrier panel have?
Our absorptive panels use an 80 mm centrifugal glass wool core with NRC ≥ 0.85, which is the practical benchmark for roadside barriers. Below roughly 0.70, the panel still blocks sound but reflects enough to undermine the wall on the opposite side of the road.
How much noise does a sound barrier actually reduce?
A properly designed and installed barrier delivers a measured reduction of 10–25 dB at the receiver behind it, depending on barrier height, distance from the source and terrain. The panel itself insulates 25–40 dB(A) — the installed result is always lower because sound bends over the top edge.
Turn the guide into a specification
Send your barrier length, target height and the noise source — a written specification and quotation come back within 24 hours, and the export desk is on call 24/7 (GMT+8).