Short answer: an imported noise barrier costs roughly USD 25–95 per square metre of barrier face, FOB China. Highway-grade absorptive systems sit at the upper half of that band; simple reflective panels at the bottom. That spread is wider than most buyers expect, and it is almost entirely specification-driven — not margin-driven.
This guide walks through the numbers the way an exporter sees them, so you can budget a project and then compare quotations on equal terms.
Indicative price bands by barrier type
| Barrier type | Indicative FOB range (USD/m²) | Typical use |
|---|---|---|
| Reflective metal panel (single leaf) | 25–45 | Railway cuttings, plant boundaries where absorption is not critical |
| Absorptive composite panel (perforated face + acoustic core) | 35–70 | Highways and urban roads facing communities |
| Transparent PC panel section | 45–95 | Visibility-critical stretches: interchanges, medians, sightlines |
Figures are indicative budgeting bands for 2026, converted from Chinese domestic market ranges. They exclude freight, duties and civil works. Every project is priced to your drawing and specification.
The six factors that move the price
1. Panel construction
A single-leaf reflective panel is the cheapest structure. An absorptive panel adds a perforated face, an acoustic core (typically 80 mm centrifugal glass wool, NRC ≥ 0.85) and a back leaf — more material, more press work, roughly 30–50% more cost than a plain leaf.
2. Galvanizing and coating
Hot-dip galvanizing after fabrication is the standard corrosion treatment for posts and brackets; thicker coating and any top-coat paint add cost per kilogram of steel. This is one area where cutting corners shows up years later as rust streaks — ask every supplier for zinc thickness readings per batch, not just a claim.
3. Post spacing and steel section
Posts are the skeleton, and their cost swings with spacing and section weight. Widening post spacing reduces post count but raises the load each panel and post must carry — the engineering has to balance, not just the bill of quantities.
4. Wind load design
Coastal sites, bridges and tall barriers need heavier posts and deeper foundations. A supplier who prices without asking about wind conditions is quoting a product, not your project.
5. Height and total area
Pricing is quoted per square metre of barrier face (height × length). Taller barriers also need proportionally stronger posts, so a 5-metre wall costs more per square metre than a 3-metre one of the same design.
6. Order volume
Full container quantities price better than LCL shipments. A single 40-foot container typically carries 300–500 m² of panels depending on height and construction.
How to compare two quotations fairly
Put both suppliers on one page before you compare numbers:
- Same scope: panels + posts + fasteners + anchor bolts, FOB a named Chinese port, EXW and CIF quoted separately.
- Same specification: one written sheet — panel thickness, core type and density, galvanizing weight, post section and spacing, hardware grade.
- Same evidence: batch test reports, zinc thickness readings and packing method stated in the quote, not promised after the order.
If one quote is 30% lower with half the detail, you are not seeing a bargain — you are seeing the corners you will discover at installation.
Getting a firm number
We price from your drawing or even a rough site sketch: barrier length, target height, panel type and the noise source. Send your project details and a quotation comes back within 24 hours, with the specification written out line by line — see our highway barrier system for the standard construction behind these price bands.
Frequently asked questions
What does a noise barrier cost per square metre?
Indicative FOB China pricing runs from about USD 25 to 95 per square metre of barrier face, depending on the panel construction, coating system and post design. Highway-grade reflective or absorptive barriers typically fall between USD 30 and 100 per square metre. Treat these as budgeting figures, not quotations.
Why do two quotations for the same barrier differ by 30% or more?
Almost always specification, not margin: steel thickness, galvanizing weight, acoustic core density, post spacing and wind-load design each move the cost. Ask both suppliers to price against one written specification sheet and the gap usually shrinks to single digits.
Does the quoted price include installation?
No barrier quote from us includes installation. We supply the barrier system, post foundations' anchor components and English installation drawings; your local contractor executes the civil works and erection. Budget installation separately with your contractor.
How fast can I get a firm quotation?
We return quotations within 24 hours once we have your drawing or specification — barrier length, target height, panel type and the noise source you are treating. Send what you have; our engineers will help complete the rest.
Turn the guide into a specification
Send your barrier length, target height and the noise source — a written specification and quotation come back within 24 hours, and the export desk is on call 24/7 (GMT+8).